| |
LUBE 'N LOOSEN
|
 |
Lube 'N Loosen is the environmentally
safe, non-toxic, non-flammable way to
cut rust and lubricate everything around
the house or shop:
- Household Jobs
- Hinges
- Cars
- Bicycles
- Chains
- Power Tools
- Sewing Machines
- Rust Protection
- Winches and Cables
- Air Tools
|
LUBEGARD® Lube N' Loosen Benefits
- Stops squeaks
- Frees sticky mechanisms
- No. 1 proven assembly lubricant
- Loosens difficult rusted bolts
- Protects against rust/corrosion
- Non-aerosol and non-flammable
- Biodegradable (EPA/560/6-82/003),
Biodegration Test ASTM-5864
- Aquatically Non-toxic (EPA/600/4-90/027)
- Lasts up to 25 times longer
|
|
For transmission valve
body assembly, click
here
COMPARISON OF LUBE 'N
LOOSEN and WD-40
| ATTRIBUTES |
WD-40 Aerosol |
LUBE 'N LOOSEN |
| HAZARDOUS
INGREDIENTS |
77%-98%
|
0%
|
| NON-HAZARDOUS
INGREDIENTS |
<10%
|
100%
|
| CONTENTS
|
|
|
Aliphatic
Petroleum Distillates
Petroleum Base Oil
Propellant
Vegetable Oil Derivatives |
60%-70%
15%-25%
2%-3%
0% |
0%
0%
0%
100% |
| PROPERTIES
|
|
|
Flash
Point
Flammability Limits
Volatile Organic
Compounds (VOC's)
Exposure Limits (vapor)
Biodegradable
Aquatically Nontoxic
|
110
F
Lower Limit 1%
Upper Limit 6%
Present
100 ppm
No
Not Mentioned |
480
F
None
None
None
Yes
Yes
|
| PERFORMANCE
|
|
|
Lubrication
- Falex Pin & Vee Initial Wear
(1)
Lubrication Persistence -
Falex Pin & Vee Drained Wear (2)
Rust Protection - Humidity Cabinet
(3)
Unprotected steel rusted |
Weld failure in 8 min
Weld failure in 105 s
No Rust
|
Full
20 minute run
1.0 mg metal wear in
full 2 minute run
No Rust
|
|
|
(1) Pins and Vee blocks
for the Falex Pin and Vee testing machine
were sprayed with product and then immediately
tested at 250 lbs clamping force for 20
minutes or until failure of the metal
surfaces.
(2) Pins and Vee blocks for the Falex
Pin and Vee testing machine were sprayed
with product, allowed to drain overnight,
then tested at 250 lbs clamping force
for 2 minutes or until failure of the
metal surfaces.
(3) Samples of steel wool were sprayed
with the products and placed in a closed
container at 100% humidity at a temperature
of 150 F for 5 hours.
|
