Home Home Home Industrial Products
Industrial Products

Metalworking

Total Loss Lubricants

Biodegradable Products

All-Purpose

test chart

Gear Oils for Worker and Environmental Safety

Test Results of ILI biodegradable Bio Gear Fluids
(AGMA 2, 4, 6 are representative of AGMA viscosity range from 2 to 8A)
Gear Oil class ASTM Criteria AGMA 2 AGMA 4 AGMA 6
Viscosity @ 100°C   AGMA 68 cSt 144 cSt 303 cSt
Rust Test: Synthetic Sea Water D 665B Pass Pass Pass Pass
Foaming (Initial/Final) D 892  
Sequence 1 (5 sec)   75/10 Trace/0ml Trace/0ml Trace/0ml
Sequence 2 (30 sec)   75/10 35ml/0ml 25ml/0ml 25ml/0ml
Sequence 3 (5 sec)   75/10 Trace /0ml Trace /0ml Trace /0ml
Copper Corrosion D 130 1B 1A 1A 1A
Demulsibility D 1401  
% Water in Oil   1 max 0.1% 0.3% 0.2%
Free Water   60 min 80 ml 81 ml 82.5 ml
Emulsion   2 max 6.0 ml 6.0 ml 6.5 ml
Pour Point D 97 -6 C -15 C -24 C -15 C
Oxidative Stability: Visc. Increase D 2893 +10% max +8.43% +9.56% +10.36%
Performance   Spec AGMA 2 AGMA 4 AGMA 6
Four Ball Wear S-205 0.35 0.30 0.30 0.30
Four Ball EP:   Weld
                           LWI 		D 2783 250
45 		315
60 		400
64 		400
62
Timken OK Load, lbs D 2782 60 min 100+ 100+ 100+
FZG Load stage A/8.3/90 11 min 12+ 12+ 12+

 
 

For information on purchasing LUBEGARD® Industrial Products, contact us.

Top of Page

© International Lubricants, Inc. 2003. All Rights Reserved.