LUBE 'N LOOSEN
|
|
Lube 'N Loosen
is the environmentally safe, non-toxic, non-flammable way to
cut rust and lubricate everything around the house or shop.
Applications:
- Household Jobs
- Hinges
- Cars
- Bicycles
- Chains
- Power Tools
- Sewing Machines
- Rust Protection
- Winches and Cables
- Air Tools
|
|
LUBEGARD® Lube N'
Loosen Benefits
- Stops squeaks
- Frees sticky mechanisms
- No. 1 proven assembly lubricant
- Loosens difficult rusted bolts
- Protects against rust/corrosion
- Non-aerosol and non-flammable
- Biodegradable (EPA/560/6-82/003),
Biodegration Test ASTM-5864
- Aquatically Non-toxic (EPA/600/4-90/027)
- Lasts up to 25 times longer
|
For transmission
valve body assembly, use Valve
and Assembly Lube or Assemblee Luub
COMPARISON OF LUBE 'N LOOSEN and WD-40
|
ATTRIBUTES |
WD-40 Aerosol |
LUBE 'N LOOSEN |
| HAZARDOUS INGREDIENTS
|
77%-98% |
0% |
| NON-HAZARDOUS
INGREDIENTS |
<10% |
100% |
| CONTENTS |
|
|
Aliphatic Petroleum
Distillates
Petroleum Base Oil
Propellant
Vegetable Oil Derivatives |
60%-70%
15%-25%
2%-3%
0% |
0%
0%
0%
100% |
| PROPERTIES |
|
|
Flash Point
Flammability Limits
Volatile Organic Compounds
(VOC's)
Exposure Limits (vapor)
Biodegradable
Aquatically Nontoxic
|
110 F
Lower Limit 1%
Upper Limit 6%
Present
100 ppm
No
Not Mentioned |
480 F
None
None
None
Yes
Yes
|
| PERFORMANCE |
|
|
Lubrication -
Falex Pin & Vee Initial Wear (1)
Lubrication Persistence -
Falex Pin & Vee Drained Wear (2)
Rust Protection - Humidity Cabinet (3)
Unprotected steel rusted |
Weld failure
in 8 min
Weld failure in 105 s
No Rust
|
Full 20 minute
run
1.0 mg metal wear in
full 2 minute run
No Rust
|
|
(1) Pins and
Vee blocks for the Falex Pin and Vee testing machine were sprayed
with product and then immediately tested at 250 lbs clamping force
for 20 minutes or until failure of the metal surfaces.
(2) Pins and Vee blocks for the Falex Pin and Vee testing machine
were sprayed with product, allowed to drain overnight, then tested
at 250 lbs clamping force for 2 minutes or until failure of the
metal surfaces.
(3) Samples of steel wool were sprayed with the products and placed
in a closed container at 100% humidity at a temperature of 150 F
for 5 hours.
|
